2012-08-21

Torque settings

Generator
  • Top-front bolt: 25 Nm
  • Bottom-front bolt: 50 Nm
  • Bracket-to-generator nut/bolt in the back: 25 Nm
Thermostat housing
  •  LB9 and L98: 34 Nm (25 lb. ft.), 
  •  L03: 28 Nm (21 lb. ft.).
  •  LHO: 21 Nm (15 lb.ft.).
Valve rocker cover
  •  11 Nm (95 lb in)
Throttle Body
  • TBI attaching bolts: 22 Nm (16 lb ft)
  • Fuel inlet/outlet nut (original, screw onto TBI unit - replaced by aluminum adapters): 
    • inlet nut 40 Nm  (30 lb ft)
    • outlet 29 Nm (21 lb ft)
  • Fuel line nuts (original, attache pipesto in-/outlet nuts - replaced by AN-6 fittings ): 
    • 27 Nm (20 lb ft)
  • I'm not sure the aluminum adapters and teflon gaskets can handle the same tightening torque as the original (steel?) nuts.


No comments:

Post a Comment